DCAC 1200 Industrial Air Cleaner For Hire
£75.00 ex. VAT. per week
Excluding carriage fees
CAS-Hire’s DACA1200 is mid range portable, tough and high effective air cleaner which works ideally in between performance levels of the DCAC500 and DCAC2000.
This Product Requires Filters
Product Documents
Product Documents
- Description
- Additional information
Description
CAS-Hire’s DCAC 1200 is mid range portable, tough and high effective air cleaner which works ideally in between performance levels of the DCAC 500 and DCAC 2000.
Due to its highly efficient operation it can also be operate in reasonably large rooms as it cleans air up to 1100 m3/h. The DCAC1200 in manufactured from stainless steel sheet metal and designed to withstand some of the more demanding working conditions.
The DCAC 1200 fan is a radial blower coupled to specifically designed scroll to improve high pressure throughout its complete performance range.
This allows the DCAC 1200 unit to produce high amounts of airflow throughout the entire lifetime of the filter. It has a filter indication light which illuminates when it’s time to replace the filter.
Ideal Applications:
- Bakeries
- Hospitals and laboratories
- Factory Processes
- Site Cleaners
- Standards / calibration rooms
- Workshops, home and office areas whilst undergoing plastering, demolition, joinery and general construction works
- Enhancing air quality within your working environment
Good to Know:
- The DCAC 1200 portable air cube air cleaner is also has a variable fan speed controller which allows you to save energy. An additional exhaust hose can be used to create negative pressure in a sealed room.
- Minimize airborne dust contaminants that are hazardous to your health, e.g. silica dust amongst other dangerous particulate
- Excellent addition to source dust extraction created on construction sites whilst tiling, plastering , wall chasing or decorating
- Frequent choice for bakeries and joinery workshops to clean the air from health hazardous flour or fine wood dust fibre
- Variable fan speed control
- High effective low energy consumption operating fan
- Minimal operating noise level
- Filter indication lamp that is lit when it’s time to change the filter
- Simple to use filter change (cartridge air filter) for easy maintenance
Filters Must Be Purchased
Our Industrial air scrubbers require both HEPA and pre filters to operate. As hire equipment is used in a wide range of environments, fresh filters are needed to prevent potential cross-contamination and ensure the optimum machine performance efficiency.
Filter Special Offer
-
DCAC 1200 Hepa filter
CAS-Hire’s DCAC filter range use conical (style) pleated HEPA 13 filters in all air cleaner dust extraction units.
The pleated filters have a very large area in relation to it’s physical…
-
DCAC 1200 Pre Filter
CAS-Hire’s DCAC filter range use conical (style) pleated HEPA 13 filters in all air cleaner dust extraction units.
The pleated filters have a very large area in relation to it’s physical…
Optional Accessories for Hire
-
3m Hot Air Discharge Hose 315mm Hire
The vinyl 305mm diameter ribbed flexible duct is supplied 3m in lengths. It can be fitted to the discharge reducer adapter on top of the units to guide the safe…
Excluding carriage fees More Details
IMPORTANT NOTICE
This air cleaner is not to be used for asbestos removal or air cleaning where asbestos particulate matter is openly found.
Additional information
Weight | 23 kg |
---|---|
Dimensions | 46 × 60 × 87 cm |
Negative Pressure | Max 608 Pa |
Air Flow Rate | 1100 m3/h |
Pre filter Area | 0.5m2 |
Hepa Filter Area | 5.0m2 |
Low energy fan power | 230v 385w |
Degree of separation | Hepa 13 |